Product description
24LC64 is a 64 Kbit Electrically Erasable PROM. The device is organized as a single block of 8K x 8-bit memory with a 2-wire serial interface. Low-voltage design permits operation down to 1.7V, with standby and active currents of only 1µA and 1 mA, respectively. It has been developed for advanced, lowpower applications such as personal communications or data acquisition. The 24LC64 also has a page write capability for up to 32 bytes of data. Functional address lines allow up to eight devices on the same bus, for up to 512 Kbits address space.
* Single-supply with operation down to 2.5V for 24LC64 devices
* Low-power CMOS technology:
- Active current 1 mA, typical
- Standby current 1µA, typical
* 2-wire serial interface, I2C compatible
* Schmitt Trigger inputs for noise suppression
* Output slope control to eliminate ground bounce
* 100 kHz and 400 kHz clock compatibility
* 1 MHz clock for FC versions
* Page write time 5 ms, typical
* Self-timed erase/write cycle
* 32-byte page write buffer
* Hardware write-protect
* ESD protection > 4,000V
* More than 1 million erase/write cycles
* Data retention > 200 years
* Single-supply with operation down to 2.5V for 24LC64 devices
* Low-power CMOS technology:
- Active current 1 mA, typical
- Standby current 1µA, typical
* 2-wire serial interface, I2C compatible
* Schmitt Trigger inputs for noise suppression
* Output slope control to eliminate ground bounce
* 100 kHz and 400 kHz clock compatibility
* 1 MHz clock for FC versions
* Page write time 5 ms, typical
* Self-timed erase/write cycle
* 32-byte page write buffer
* Hardware write-protect
* ESD protection > 4,000V
* More than 1 million erase/write cycles
* Data retention > 200 years
