Product description
AG TermoPasty Flux TK83, 1 liter liquid flux. Highly suitable for manual tinning and for restoring solderability, for example during repair work. It provides excellent wetting of the solder and is well suited for lead-free precision soldering.
The flux can be applied to circuit boards using foam and wave methods, by immersion, or with a cotton swab.
TK83 is a versatile and high-performance flux developed for professional assembly and repair of electronics. It is particularly effective for soldering surface-mounted components (SMD) as well as for manual tinning to restore solderability.
TK83 is a moderately activated flux based on an alcohol solution of rosin, with added organic activators according to EN 29454, ISO 9454 (type 1134) and J-STD-004 (class ROL0).
Residues are non-corrosive after soldering, which means that cleaning is not required (No-Clean type). If desired, residues can be removed with isopropanol (Isopropyl alcohol).
TK83 is intended for professional use in, for example, repair shops, service units, and manufacturing industries.
Note: Always read the safety data sheet before use. Use only in well-ventilated areas. Always reseal the container after use.
Typical applications:
- Assembly of SMD and THT components
- Manual tinning and restoration of solderability
- Machine soldering and tinning of cable ends
Specifications:
- Content: 1 liter
- Standards: EN 29454, ISO 9454 type 1134, J-STD-004 ROL0
- Density: 0.86 g/cm³ at 20 °C
- Maximum soldering temperature: 280 °C
- Solid content: 24%
- Viscosity: Liquid
- Cleaning: No-Clean type
Warning:
Contains: Isopropanol, Colophonium and Benzoic acid
Hazard:
- H225 - Highly flammable liquid and vapour
- H317 - May cause an allergic skin reaction
- H318 - Causes serious eye damage
- H336 - May cause drowsiness or dizziness
- H373 - May cause damage to organs through prolonged or repeated exposure
Precautionary statement:
- P101 - Keep out of reach of children
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P260 - Do not breathe fume/mist/vapours
- P280 - Wear protective gloves and eye protection
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310 - Immediately call a doctor
- P333+P313 - If skin irritation or rash occurs: Get medical advice/attention.
- P370+P378 - In case of fire: Use powder extinguisher/sand/carbon dioxide to extinguish
