Product description
The LD1085 is a low drop voltage regulator able to provide up to 3 A of output current. Dropout is guaranteed at a maximum of 1.2 V at the maximum output current, decreasing at lower loads. The LD1085 is pin-to-pin compatible with the older 3-terminal adjustable regulators, but offers better performance in terms of drop and output tolerance. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1085 quiescent current flows into the load, thus increase efficiency. Only a 10 ìF minimum capacitor is need for stability. On-chip trimming allows the regulator to reach a very tight output voltage tolerance, within ± 1% at 25 °C.
* Typical dropout 1.3 V (at 3 A)
* Fixed output voltage 5 V
* Guaranteed output current up to 3 A
* Output tolerance ± 1% at 25 °C and ± 2% in full temperature range
* Internal power and thermal limit
* Wide operating temperature range -40 °C to 125 °C
* Package available: TO-220, TO-220FP, D²PAK, D²PAK/A
* Pinout compatibility with standard adjustable VREG
* Typical dropout 1.3 V (at 3 A)
* Fixed output voltage 5 V
* Guaranteed output current up to 3 A
* Output tolerance ± 1% at 25 °C and ± 2% in full temperature range
* Internal power and thermal limit
* Wide operating temperature range -40 °C to 125 °C
* Package available: TO-220, TO-220FP, D²PAK, D²PAK/A
* Pinout compatibility with standard adjustable VREG