Product description
This 8-channel USB Logic Analyzer with support for sampling rates of up to 24MHz provides a good while economic option making it a great tool for quickly diagnosing most communication issues we encounter.
These analyzers will work with both 3.3V and 5V systems (up to 5.25V max and 2.0V minimum on a high logic-level) and is powered via an included type-C USB cable. This logic analyzer works with PulseView -- an open-source, cross-platform signal analysis software suite.
The analyzer ships with Female-To-Female jumper wires. If you're using an Uno or board with female headers we recommend picking up a handful of Male-To-Male jumpers to connect the analyzer to the female headers.
* 8-channels
* Sampling rate up to 24MHz, configurable down to 20kHz
* 5.25V maximum voltage input
* 2.0V minimum logic-high
* 0.8V maximum logic-low
* Input impedance > 100kO, 5pF
* USB power supply
* USB Type C Connector
* Supports open-source sigrok logic analyzer software
* Cross-platform support: Windows, Mac OS X, Linux, Android, etc.
* Dimensions: 54.7 x 27.4 x 14.1 mm
Note: On some units the GND connection that's adjacent to input six isn't actually a ground, it appears to be some sort of clock signal. We recommend not using that pin for anything just to be safe.