Product description
8-bit Microcontroller based on the PIC RISC architecture.
Max CPU operating frequency: 20MHz
Flash: 2k words
RAM: 128B
Features
* Precision Internal Oscillator:
- Factory calibrated to ±1%, typical
- User selectable frequency: 4 MHz or 8 MHz
* Power-Saving Sleep mode
* Voltage Range: 2.0V to 5.5V
* Power-on Reset (POR)
* Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
* Brown-out Reset (BOR)
* Watchdog Timer (WDT) with Independent Oscillator for Reliable Operation
* Multiplexed Master Clear with Pull-up/Input Pin
* Programmable Code Protection
* 11 I/O Pins and 1 Input Only
- High current source/sink for direct LED drive
- Interrupt-on-Change pins
- Individually programmable weak pull-ups
* Analog Comparator module with:
- Two analog comparators
- Programmable on-chip voltage reference (CVREF) module (% of VDD)
- Fixed Voltage Reference
- Comparator inputs and outputs externally accessible
- SR Latch
- Built-In Hysteresis (user selectable)
* Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler
* Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Timer1 Gate (count enable)
- Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator if INTOSC mode selected
- Timer1 oscillator
* In-Circuit Serial ProgrammingTM (ICSPTM) via Two Pins
* A/D Converter:
- 10-bit resolution
- 8 external input channels
- 2 internal reference channels
* Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
* Enhanced Capture, Compare, PWM module:
- 16-bit Capture, max. resolution 12.5 ns
- 16-bit Compare, max. resolution 200 ns
- 10-bit PWM with 1, 2 or 4 output channels, programmable "dead time", max. frequency 20 kHz
Max CPU operating frequency: 20MHz
Flash: 2k words
RAM: 128B
Features
* Precision Internal Oscillator:
- Factory calibrated to ±1%, typical
- User selectable frequency: 4 MHz or 8 MHz
* Power-Saving Sleep mode
* Voltage Range: 2.0V to 5.5V
* Power-on Reset (POR)
* Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
* Brown-out Reset (BOR)
* Watchdog Timer (WDT) with Independent Oscillator for Reliable Operation
* Multiplexed Master Clear with Pull-up/Input Pin
* Programmable Code Protection
* 11 I/O Pins and 1 Input Only
- High current source/sink for direct LED drive
- Interrupt-on-Change pins
- Individually programmable weak pull-ups
* Analog Comparator module with:
- Two analog comparators
- Programmable on-chip voltage reference (CVREF) module (% of VDD)
- Fixed Voltage Reference
- Comparator inputs and outputs externally accessible
- SR Latch
- Built-In Hysteresis (user selectable)
* Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler
* Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Timer1 Gate (count enable)
- Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator if INTOSC mode selected
- Timer1 oscillator
* In-Circuit Serial ProgrammingTM (ICSPTM) via Two Pins
* A/D Converter:
- 10-bit resolution
- 8 external input channels
- 2 internal reference channels
* Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
* Enhanced Capture, Compare, PWM module:
- 16-bit Capture, max. resolution 12.5 ns
- 16-bit Compare, max. resolution 200 ns
- 10-bit PWM with 1, 2 or 4 output channels, programmable "dead time", max. frequency 20 kHz