Product description
8-bit Microcontroller based on the PIC RISC architecture.
Max CPU operating frequency: 33MHz
EPROM Program Memory: 8k words
RAM: 454B
Features
* 33 I/O pins with individual direction control
* High current sink/source for direct LED drive
- RA2 and RA3 are open drain, high voltage (12V), high current (60 mA), I/O
* Two capture inputs and two PWM outputs
- Captures are 16-bit, max resolution 160 ns
- PWM resolution is 1- to 10-bit
* TMR0: 16-bit timer/counter with 8-bit programmable prescaler
* TMR1: 8-bit timer/counter
* TMR2: 8-bit timer/counter
* TMR3: 16-bit timer/counter
* Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI)
* Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
* Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
* Code-protection
* Power saving SLEEP mode
* Selectable oscillator options
* Low-power, high-speed CMOS EPROM/ROM technology
* Fully static design
* Wide operating voltage range (2.5V to 6.0V)
* Low-power consumption
- < 5mA @ 5V, 4 MHz
- 100uA typical @ 4.5V, 32 kHz
- < 1uA typical standby current @ 5V
Max CPU operating frequency: 33MHz
EPROM Program Memory: 8k words
RAM: 454B
Features
* 33 I/O pins with individual direction control
* High current sink/source for direct LED drive
- RA2 and RA3 are open drain, high voltage (12V), high current (60 mA), I/O
* Two capture inputs and two PWM outputs
- Captures are 16-bit, max resolution 160 ns
- PWM resolution is 1- to 10-bit
* TMR0: 16-bit timer/counter with 8-bit programmable prescaler
* TMR1: 8-bit timer/counter
* TMR2: 8-bit timer/counter
* TMR3: 16-bit timer/counter
* Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI)
* Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
* Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
* Code-protection
* Power saving SLEEP mode
* Selectable oscillator options
* Low-power, high-speed CMOS EPROM/ROM technology
* Fully static design
* Wide operating voltage range (2.5V to 6.0V)
* Low-power consumption
- < 5mA @ 5V, 4 MHz
- 100uA typical @ 4.5V, 32 kHz
- < 1uA typical standby current @ 5V