Product description
The Serial Web Server module provides TCP/IP access to the serial data. The output pin uses a 20-pin 2mm spacing layout, which is pin-compatible with XBee modules. The LinkSprite Serial Web Server module can also be plugged directly into a powerline communication modem to act as a powerline-to-web server bridge.
Because it's a serial server, a configurable static IP address is used to prevent the IP address from being changed. The IP and serial settings are configurable through the convenient AT commands, detailed in the datasheet.
Features:
* 3.3V TTL UART
* Low power
* Fully transparent mode, plug and play out of the box without the need to do any programming
* Static IP address
* 10BaseT/100BaseTX Ethernet PHY
* TCP/IP protocol support
* Auto negotiation (Full-duplex and half duplex) support
* AT command set, for advanced configuration
Because it's a serial server, a configurable static IP address is used to prevent the IP address from being changed. The IP and serial settings are configurable through the convenient AT commands, detailed in the datasheet.
Features:
* 3.3V TTL UART
* Low power
* Fully transparent mode, plug and play out of the box without the need to do any programming
* Static IP address
* 10BaseT/100BaseTX Ethernet PHY
* TCP/IP protocol support
* Auto negotiation (Full-duplex and half duplex) support
* AT command set, for advanced configuration